This Blog was posted for you By Your Electrician San Antonio – Good Electric

Wiring Installations And Techniques Explained

This article attempts to explore various wiring techniques and installation methods that are commonly used.

Installation Methods and Wiring Techniques in Electrical Work

Some might think that electrical wiring is merely installing a switch and connecting appliances to it. But it is not so! Wiring is an extremely complex process that requires proper expertise and installation knowledge to avoid fire hazards. The wiring installations should be done only after assessing factors like floor & wall constructions, ceiling type, building materials & installation requirements. Once the installation is done, the process follows several testing, supply & commissioning procedures for switches, wiring, accessories, conduits, and outlets before using those. Remember, an improper wiring design is unsafe and can jeopardize appliances’ safety. In severe cases, it risks lives. This article is an attempt to explore various wiring techniques and installation methods that are commonly used.

Wiring installation methods and various stages of preparing a wiring installation

Electrical wiring is a method of connecting accessories and appliances to the main meter board for supplying electrical energy. The installation methods are usually classified into the Loop system and the joint box or Tee system.

Looping system: Considered as the universal installation method, the looping system connects appliances in parallel positions such that each appliance is controlled separately. The feed conductors are looped into the terminals directly whenever the connections are required.

Joining box or Tee system: Instead of directly connecting from the feed conductors, a joint box system connects appliances through joint boxes using joint cutouts or connectors. Although an expensive installation method, commercial electricians recommend using this system for residential and commercial projects. Following are five wiring aspects a commercial electrician must be careful of before the installation processes.

Ensure that wires are purchased based on various determinants such as conductor strand count, insulation type, strand’s diameter, and the cross-section area.
Determine the conductor that needs to be installed. While a solid wire conductor is preferred for rigid connections, stranded wires are used in electrical installations in residential and commercial buildings.
Color-coded wires are important as commercial electricians use color codes for proper wiring.
Ensure that electrical boxes, switches, respectable, and other wiring elements are purchased according to the size and ratings.
Lastly, a commercial electrician must be equipped with basic tools like cutters, strippers, testers, and pliers for their installation works. Guiding software for managing the projects and scheduling the activities is an added advantage.

Four basic wiring techniques used by commercial electricians

Capping and casing wiring
This wiring technique uses wooden casings with parallel grooves that hold the cables attached to walls or ceilings with a cap covering the wires. Though expensive, the technique protects the wirings from damage. However, the chances of short circuits are high in some cases that can result in huge accidents. Commercial electricians need to track the possibilities earlier on.

Cleat wiring
Cleat wiring is the best suitable for temporary wirings. In this technique, cables are attached to the walls using porcelain, wood, or plastic cheats and are installed at different intervals. These wiring techniques are easy to repair and are easy to detect faults.

Batten wiring
This wiring technique uses wooden battens to run the insulated wires through it. The battens are fixed on the ceilings and walls with plugs or screws. Batten installation is easier to fix, has low leakage chances, and can be easily customized.

Conduit wiring
Conduit wiring makes use of PVC cables. The surface conduit has pipes running over the wall surfaces, whereas the concealed conduit wiring runs inside the wall and the ceiling surface is covered with plastering. While surface wiring is used in industrial applications, concealed conduit wirings are common in residential buildings.

Reasons Why You Should Engage a Commercial Electrician

Know how a commercial electrician is useful for your commercial establishment and the reasons why you must engage a trusted commercial electrician.

How do you benefit from employing a trusted commercial electrician?

Electricity, the greatest invention of all time, is the core of modern existence. As innovations and developments rapidly increase, the demand for a trusted commercial electrician has doubled over the decades. Whether that is a simple electric connection in your home or a sophisticated circuit in the industries, employing the best electrician guarantees a long life for your electrical circuit.
Why do you need an expert and trusted electrician for your electrical requirements? Is it okay to trust electrical contracting companies for your electrical needs? Where would you find a trusted commercial electrician? Find the answer to all your queries in this article and get to know the benefits of employing a commercial electrician for your every need.

Who is a commercial electrician?

While a lot has been said about a trusted electrician’s needs, whether a commercial electrician fits perfectly for your needs requires detailed scrutiny. A commercial electrician is a licensed and trained professional electrician responsible for wiring electrical system installations in a commercial building. Commercial buildings comprise big buildings like restaurants, shopping malls, high-rise buildings, hospitals, or government buildings. Although a commercial electrician is expected to carry on duties similar to a residential electrician, their licensing and expertise differ slightly. More here

A commercial electrician is responsible for installing electrical and wiring materials like switches and lights, maintaining & inspecting the entire electrical system, detecting & fixing issues, complying with government rules, and training the apprentices or future electricians. Here are a few benefits of employing a trusted commercial electrician for your commercial building needs.

Benefits of employing a commercial electrician for your electrical works

-Knowledge and experience
Experience and niche knowledge are two important factors that make an electrician reliable. Although residential electrical servicing knowledge shares a commonality with commercial electrical service, certain important differences make the commercial electrician a step ahead of other electricians. The difference in the usage, distribution, cost-effective electricity usage, and consistent supply of electricity makes the job of a commercial electrician a tad complex.
-Consistent business operation
Commercial structures demand a consistent supply of electricity that does not interrupt business operations. Even though you have installed the best electrical circuit or have your bills paid on time, it is normal to experience electrical issues once in a while. Here is where the need for a commercial electrician arises. The electrician guarantees that your commercial operations continue no matter the type of interruptions.
-Save your money
A business makes no profit unless there is an amount saved. What more could be the perfect saving other than a nominal electric bill despite your huge electrical usage. A commercial electrician has broad experience in various business operations and can help business owners reduce their expenses. A contracting agency is ideal for establishments that wish to have a long association with a commercial electrician.
This Blog was posted for you By Your Electrician San Antonio – Good Electric

Formosan Super Termites – Termite Treatment and Control

Formosan termites, sometimes called the “Super Termite” are coming close to their time to begin swarming season. These are the termites with wings also called “alates”.The Eastern and Western subterranean termites swarm during the daylight hours but the Formosan termites prefer to swarm after sundown to midnight hours.

Swarming termites do not eat wood. They have one sole purpose in the termite colony. That is to start new colonies. Most professionals agree that it usually takes a new colony, depending on conditions, 2-7 years to reach large enough numbers to start producing termite swarmers. Mature colonies can have as many as 1-10 million termites and can tunnel out as far as an acre to food sources. Because of the size of the colonies this Super Termite can cause a large amount of damage to a home on average in 3-6 months, eating as much as 13 ounces of material per day in your home.

Formosan termites will usually have a nest in the ground however besides reproducing faster than most other termites they can also make a nest in your home not requiring contact with the ground. This is done by creating a moisture carton nest. These types of colonies have been found in trees, utility poles, logs, and the walls of your home. These are aerial formations so when you see signs of termite damage it is important to identify what kind of termite it is so you can determine if there is a possibility of an aerial nest in your home. Native subterranean swarmers are usually black in color and Formosan swarmers are usually a pale yellowish-brown color. Identifying the rest of the termites by looking at the workers is nearly impossible for an amateur. However, if you see any termite soldiers then you may be able to distinguish between the Native termites and Formosan termites. The termite soldiers will have mandibles (pinchers) and the workers will not. The main difference is the shape of their head. A Formosan soldier’s head will be small and round shape like the workers. The Native termites have an elongated shape head unlike the rounded shaped head of the workers. Both the Native and Formosan termite soldiers’ heads will also be yellowish-brown in color as opposed to the worker’s heads being white like their bodies.

Let’s say you see termites swarming in your home. If they are coming out of your walls then there could possibly be a carton nest in your home. If they are entering from outside your home then this usually indicates they are coming from somewhere outside near your home. After finding a breeding site and pairing up, they will start a king and queen and then the beginning of a termite colony inside in your walls or outside in the ground has begun. In your home a few years later you could start seeing signs of termite damage like pinholes in your wall, by this time a lot of damage may have already been done.

Prevention is extremely important. Turn all the lights off in and around your home since the swarmers are highly attracted to light. Have your home inspected for any signs where excessive moisture may occur. For example, around any plumbing lines, roof gutters, faulty roof flashing, drip guards, broken roof tiles, corners of your home, window and doors frames, fireplaces, anything placed against the house, etc. Termites require water so without a water source they usually will not be able to survive more than a few days.

Because Formosan termites reproduce so quickly and can recolonize (meaning that there could also be more than one nest carton in your home) almost anywhere, it is vital to prevent an infestation before it occurs. If you’re live in an area where you know you get termites swarming around your home at night you should have your home inspected and treated for prevention. This would be a lot cheaper in most cases than paying for damage caused by the termites which have been reported as high as 2 billion dollars in the U.S. in one year.